AH182/AH183
LOW POWER HALL EFFECT SWITCH
AH182/AH183 Rev. 8 1 of 10 NOVEMBER 2009
DS31024 www.diodes.com ?/SPAN> Diodes Incorporated
"     Micropower operation
"     2.5V to 5.5V battery operation
"     Offset Canceling Technology
"     Superior temperature stability
"     Extremely Low Switch-Point Drift
"     Insensitive to Physical Stress
"     -40癈 to 85癈 operating temperature
"     Lead Free packages: SIP-3L and SC59 (Commonly
known as SOT23 in Asia)
"     SIP-3L and SC59: Available in Green Molding
Compound (No Br, Sb)
"     Lead Free Finish / RoHS Compliant (Note 1)
AH182/AH183 is a three-terminal Hall effect sensor device with
an   output   driver,   mainly   designed   for   batteryoperation,
hand-held equipment (such as cellular and cordless phones, and
PDAs) The total operation power is down to 15uW in the
2.75V supply.
The south pole of sufficient strength will turn the output on in
SIP-3L but the north pole of sufficient strength will turn the output
on in SC59 package. The output will be turned off under no
magnetic field.
While the magnetic flux density (B) is larger than operation point
(Bop), the output will be turned on (low), the output is held until
B is lower than the release point (Brp), then turned off. The
difference between AH182 and AH183 is that the former
consumes less power than that of the latter in the Hall sensor
operation.
"     Cover detector
"     Speed measurement
"     Home safety
AH182/AH183
2.5~5.5V
Output
Gnd
R
L
C
* C is for power stabilization and to strengthen the noise immunity, the recommended capacitance is 10nF~100nF.
R
L
is the pull-up resistor, the recommended resistance is 10Kohm~100Kohm.
Features
General Description
Applications
Typical Circuit *